Con-Kartist
New member
Hey All. This isn't my first rebuild but it'll be the first project that I attempt to log progress on. I picked this roller up local and pretty cheap, didn't know anything about the kart brand until I did some research on here about it. Thankfully the stickers were still intact so I was able to find some pretty cool stuff.
Started the tear down to find everything on the axle was rusted in place, so the sprocket ended up getting cut off, the brake disc and both bearings got PB Blasted, heated and beat into submission, one of the drive wheels was stuck too.
The steering shaft was bound by rust and a bent washer, it's freed up and can rotate without sounding like a cat in a dryer. The frame is stripped and cleaned up some.
-More work coming soon..
Started the tear down to find everything on the axle was rusted in place, so the sprocket ended up getting cut off, the brake disc and both bearings got PB Blasted, heated and beat into submission, one of the drive wheels was stuck too.
The steering shaft was bound by rust and a bent washer, it's freed up and can rotate without sounding like a cat in a dryer. The frame is stripped and cleaned up some.
-More work coming soon..